Sauterelle ā lune perpétuelle

Description

u Designed and manufactured by Andreas Strehler in his workshop in Sirnach, the Sauterelle Lune perptuelle has the unique Remontoir d’galit by Andreas Strehler and a perpetual display of the phase of the moon.\t With only four components, Andreas Strehler achieves almost eternity. Only almost, because the Lune perptuelle's phase of the moon mechanism does require an occasional adjustment. To be quite precise, it requires an adjustment by ten minutes every 14,000 years or by one day every two million years. This adjustment is made through the crown and also works backwards.\t The Sauterelle Lune perptuelle by Andreas Strehler is the most precise phase of the moon ever built, combined with a unique constant force mechanism.\tTechnically, the Lune perptuelle is based on the Sauterelle, presented last year. Like the Sauterelle, also the Lune perptuelle features Andreas Strehler's unique Remontoir d'galit, delivering a constant supply of energy to the escapement.\t Remontoir d’galit\t For the first time in a wristwatch, Andreas Strehler, offers a mechanical solution which eliminates nearly all technical and mechanical influences hampering the escapement. The constant and linear supply of energy to the balance is the ideal in watchmaking. It is the basis for precision. For the Sauterelle, Andreas Strehler has gone his very own way in realising this regulated supply of energy to achieve the most technically stable solution.\t Conventionally, the complication known in watchmaking as force constante is mounted on the escapement wheel. However, this is the point in the whole movement, where the least torque is present.\t By contrast, in the Sauterelle the remontoir d'galit is placed on the seconds wheel. The remontoir d'galit therefore leaves the Swiss anchor escapement unimpeded; an escapement perfected over a period of more than 200 years. The solution used in the Sauterelle has the advantage that the complete escapement including the escapement wheel moves freely between two impulses, uninfluenced by the movement and the gear train.\tEvery second, the visible satellite gear supplies the escapement wheel with exactly the same amount of energy. At the same time, the deadbeat or jumping seconds are indicated. The energy is accumulated every second by a star shaped satellite through the winding of a hairspring. The mechanism is then released, the balance gets energy and the satellite wheel again rests against the stopping jewel (cf. attached diagram).\t The aim of the Andreas Strehler remontoir d'galit was to concentrate on the elimination of outside factors: Fluctuations in the supply of energy, flaws in the gear train (uneven discharge of the spring, uneven running of the gear train or the wheels actuating the hands) and vibrations in temperature (viscosity of lubricants) are eliminated by the remontoir d'galit.\t Different from a force constante with a fixed division ratio, the remontoir d'galit can be used independently of the movement's frequency. For this reason, the Sauterelle's movement has a frequency of 21,600 A/h – instead of 18,000 A/h – resulting in higher precision.\t Andreas Strehler's remontoir d'galit works as follows:\t One tooth of the star shaped wheel rests against the stopping jewel. This blocks the satellite arm. This satellite arm sits on the pinion of the seconds wheel and is thus linked to the gear train and the barrel and kept under tension. Hence, the stopping jewel keeps the satellite wheel and the satellite arm from moving clockwise and consequently the whole gear train from running down. The seconds wheel is not riveted to its pinion (the seconds pinion) but rotates independently. The seconds wheel is linked to the hairspring of the intermediary winding mechanism and actuated by a tube in its centre. On the other side, the seconds wheel is checked by the escapement. Hence, the seconds wheel continuously rotates clockwise, once per minute. In doing so, it moves the stopping lever fixed to the top of the tube by 6 degrees per second, also clockwise. Before the hairspring of the intermediary winding mechanism has lost too much energy, the stopping lever with its stopping jewel has moved far enough in a clockwise direction so that the stopping jewel releases the star wheel.\t The star wheel now starts to turn anticlockwise, powered by the satellite arm. The star wheel has a pinion on its lower end which follows the internal gear of the intermediary winding mechanism. By turning, it also moves forward, in the direction of the stopping lever.\t Once the star wheel has caught the stopping lever – and therefore the stopping jewel – it is being stopped. The star wheel has rotated anticlockwise by one tooth; the satellite arm has moved clockwise by 6 degrees and thus caught the stopping lever which had hurried ahead in small increments by 6 degrees.\t Now the cycle starts again, offset clockwise by 6 degrees and one tooth of the star wheel: The seconds wheel again rotates the stopping lever by 6 degrees, the star wheel is being released, turns by one tooth and on its satellite arm again catches up with the stopping lever.\t This movement of the stopping lever has re-tensioned the hairspring and resupplied the seconds wheel with energy.\t The energy supplied to the seconds wheel thus only depends on the hairspring in the intermediary winding mechanism. This is being re-tensioned every second by the satellite arm. It is therefore for all practical purposes independent from the power delivered by the barrel via the gear train and the seconds pinion to the satellite arm. In this way, the escapement wheel receives a linear supply of energy.\t In addition, only that part of the two mainsprings is being used which gives off a linear force. Once the mainsprings go beyond this ideal range, the movement is being stopped immediately (arretage on the barrel). This, together with the Remontoir d’galit, leads to an absolutely constant amplitude of the balance for 78 hour.\t Eternal phase of the moon\t Combined with the Remontoir d’galit, the Sauterelle Lune perptuelle has the most precise phase of the moon indication ever build in a wristwatch. Implemented using only four components, Andreas Strehler's phase of the moon mechanism achieves its precision partly because it is continuously moving, driven by the gear train. Conventional phase of the moon mechanisms are only moved forward once a day. This continuous movement of the moon on the dial was important for Andreas Strehler also because he takes his inspirations from nature and a continuously moving moon.\t Further, Andreas Strehler cleverly combines inner and outer toothing as well as the use of prime numbers for the number of teeth to mechanically achieve complex fractions with an integral number of teeth. This leads to the high precision of the phase of the moon mechanism.\t On the one hand, the calibre Sauterelle Lune prpuelle in all consequence follows the classical principles for the construction of watches and the traditions of finishing movements. On the other hand, the design and the execution of the movement are innovative. From the best technical solution grow the delicate and almost organic bridges and the look of the movement. The form of all of the components both follows from the solution to a technical problem and the necessities of elegance.\t To apply classical construction principals means that a movement by Andreas Strehler could have been built a hundred years ago, albeit using different technologies. Exotic materials are missing completely from his movements. In all probability, his watches can also be repaired in a hundred years' time by a skilled watchmaker.\t Andreas Strehler may adhere to traditional construction principles, but he applies them using his particular method. This begins with the composition of the movement with its central main plate. […]

Supplied by the brand to the GPHG for its entry.