Génie 01

Description

Gnie 01 by Breva: It\u2019s sunny on your wrist no matter the weather!\tThe Breva Gnie 01 is the world\u2019s first wristwatch with time, altimeter, barometer \u2013 for forecasting the weather \u2013 and power reserve indications provided by a fully mechanical movement, much of which is on display through the open dial and display back. The proprietary movement of the Gnie 01 was developed exclusively for Breva by Jean-Fran\xe7ois Mojon/Chronode. \xa0\tA dial side tour reveals a plethora of easy-to-read indications to keep the wearer fully informed about current time, altitude, remaining power in the mainspring, and a weather forecasting barometer.\tHours and minutes are displayed on a semi-transparent smoky-sapphire sub dial at 8 o\u2019clock, with small seconds below 12 o\u2019clock. A scale displaying altitude arcs around the top perimeter of the \u2018dial\u2019. Barometric pressure is indicated on a second semi-transparent smoky-sapphire sub dial at 2 o\u2019clock, with icons providing scientifically based forecasts of likely weather conditions to come.\tA 65-hour power reserve indicator at 4 o\u2019clock is instantly recognizable thanks to its engraved compass rose \u2013 an icon found throughout Gnie 01. At 6 o\u2019clock, an anaerobic capsule measuring air pressure dominates the lower section, with another identical anaerobic capsule underneath it to maximize sensitivity to the slightest change in air pressure.\tThree dual-purpose crowns on the case band provide power to, and allow setting of, the proprietary Breva movement. On the left at 9 o\u2019clock, a two-position crown is dedicated to winding the watch and setting the time. On the top right at 2 o\u2019clock, a knurled exterior ring adjusts the barometric pressure scale, while an inner pusher adjusts the position of the altitude indication.\tAt 4 o\u2019clock, a second crown on the right has a knurled locking ring that rotates 90\xb0 to lock/unlock an air valve. When unlocked, the valve opens and allows a small amount of air to equalize air pressure inside the case with the exterior air pressure. Longevity and reliability of the timepiece are maximized by means of an osmotic Teflon membrane that filters any moisture from any air before it enters the movement. Just above the crown, a red indicator on the dial marked \u2018SEALED' warns when the valve is unlocked.\tThe technological and visual feast continues through to the back of Gnie 01. A circular scale engraved around the perimeter of the caseback provides a scale providing correlations between altitude and air pressure, as the altitude affects air pressure as well as the weather.\tThrough the sapphire crystal display back, it is the vibrantly oscillating balance wheel that first catches the eye; however a more carefully inspection unveils yet more of the beautifully finished movement. When winding the movement you can see compass roses rotating on the cap of the mainspring barrel.\tThe name \u2018Breva\u2019 is inspired by \u2018La Breva\u2019, a warm southern wind that contributes to the agreeably mild microclimate around Lake Como in northern Italy. Breva Watches breathes a refreshing breeze through the often-stuffy world of Swiss haute horlogerie.\tGnie 01 is a limited edition of 55 pieces in white gold and 55 pieces in 4N pink gold.\tThe anaerobic barometer and altimeter in the Gnie 01 A barometer is an instrument for measuring air pressure, first invented by Evangelista Toricelli, a pupil of Galileo, in 1643. There are two main types of barometer: a mercury barometer, in which the pressure of the air forces a small column of mercury up a tube (similar to a mercury thermometer); and the anaerobic barometer, in which one or more aneroid capsules (aneroid means \u2018without air\u2019) expand/contract with changing air pressure.\tThe barometer and altimeter (air pressure changes with both altitude and weather conditions) measure air pressure with two small aneroid capsules stacked one above the other \u2013 the top one being clearly visible on the dial side at 5 o\u2019clock.\tThe aneroid capsules in the Gnie 01 were especially developed to Breva's specifications to optimise their precision and use in a wristwatch.\xa0 The capsules are made from a special non-magnetic memory-metal (Breva patented invention), which is lighter and stronger than aluminium and has twice the ductility of steel. The capsules are exposed for long durations to high temperature and pure oxygen to maximise thermal conductivity and oxidation resistance.\tA clearly visible lever rests on top of the aneroid capsules and transmits the combined height of the capsules through a complex system of gears and racks to the altimeter indication and the barometer. The gearing for these two displays has been carefully calculated as the scale of changing air pressure due to altitude variations is quite different to weather variations.\tThe attitude display reads from -300 to +5,300 metres, while the barometric display ranges between 973 and 1053 hectopascals (hPa). In a nod to the original method of measuring air pressure in inches of Mercury, an inner scale of the barometer is marked mmHg: Hg being the atomic name for Mercury (Hg from the Greek hydrargyrum meaning \u2018silver water\u2019).\tThe Gnie 01 barometer Before using or adjusting the barometer, air pressure inside the movement should be equalised with the exterior air pressure using the valve at 4 o\u2019clock.\tWhat is important in using air pressure to forecast the weather is the recent change in pressure, rather than the pressure itself. Rising pressure indicates good weather coming, falling pressure is a sign of inclement weather ahead. The faster the pressure changes and/or the larger the change, the more extreme \u2013 good or bad \u2013 the coming weather is likely to be.\tAfter equalising the interior air pressure, the barometer dial is rotated so that the hand points through the centre of \u2018mto\u2019 (French for weather forecast) to 1013 hPa, which is the standard (not necessarily actual) air pressure at sea level. Over the next hours \u2013 assuming no change in altitude \u2013 the hand might remain in place, indicating no change; move toward lower pressure, suggesting a possible deterioration in the weather; or move towards higher pressure, suggesting sunny weather coming on its way. Slow/small movement suggests minor changes, while fast and/or large movement forecasts more extreme weather ahead.\tThe Gnie 01 altimeter Before using or adjusting the 5,300m/17,000' altimeter, air pressure inside the movement should be equalised with the exterior air pressure valve at 4 o\u2019clock.\tBecause air pressure can vary throughout the day (due to weather changes) the altimeter should be regularly set at a known altitude to ensure accurate results. As the hand is directly linked to the air pressure, the pusher at 2 o\u2019clock moves the altitude dial (rather than the hand) left or right to synchronise the correct altitude with the indicator hand.\tAir pressure and weather forecasting Air pressure is caused by the gases in the atmosphere \u2013 mainly nitrogen (N2) and oxygen (O2) \u2013 pushing in all directions (think of gas in a balloon). These gases may be relatively light, but there are a lot of them in the atmosphere stretching approximately 24 kilometres (15 miles) above our heads. Air density/pressure varies due to: temperature \u2013 hotter air is less dense so floats above cool air; altitude: the closer air is to the planet\u2019s surface \u2013 the more gravity packs its molecules together so increases its density; and humidity.\tWhy clouds float Paradoxically water vapour molecules H2O \u2013 two hydrogen (lightest matter in the universe) plus one oxygen \u2013 are actually lighter than air molecules, which are approximately 80% N2 (two nitrogen atoms) and 20% O2 (two oxygen atoms). […]

Supplied by the brand to the GPHG for its entry.